Trend 3/60 x 1/2 TCT Two Flute Cutter 10mm x 35mm
T.C.T. Tooling1/2in Shank.C = 35 mmD = 10 mm 25/64 in
Trend 3/73D x 1/2 TCT Two Flute Cutter 12.0mm x 50mm
T.C.T. Tooling1/2in Shank.C = 50 mmD = 12mm 15/32in Please note: This cutter is especially suited for drilling.
Trend 3/81 x 1/2 TCT Two Flute Cutter 12.7mm x 32mm
T.C.T. Tooling1/2in Shank.C = 32 mmD = 12.7 mm 1/2 in
Trend 3/83 x 1/2 TCT Two Flute Cutter 12.7mm x 50mm
TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm deep plunge and suitable one pie...
Trend 3/83D x 1/2 TCT Two Flute Cutter 12.7mm x 50mm
Ideal for cutting kitchen worktops. This cutter is especially suited for drilling. C = 50 mmD = 12.7 mm 1/2 in
Trend 3/83M x 1/2 TCT Two Flute Cutter 12.7mm x 50mm
Shorter shank for Makita 3600B and 3612BR, Ryobi and Hitachi Routers.Ideal for cutting kitchen worktops. C = 50 mmD = 12.7 mm
Trend 31/02 x 1/4 TCT Dovetail Cutter 103° 13.2 x 13mm
T.C.T.1/4in Shank.A = 103° D = 13.2 mmC = 13 mm
Trend 334 x 1/2 TCT Aquamac Recessor
Ref 334 recessing cutter will accomodate the Schlegal Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and ...
Trend 337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm
A one-piece tongue and groove set. The parts are inter-changed on the arbor to alter the set up. Maximum timber thickness 22 mm. Minimum timber t...
Trend 348 x 1/2in TCT Intumescent Cutter Set 15mm
Cutter Set Ref. 348 is used for the grooving of door edges to receive 10mm intumescent strip. The arbor can be lowered or raised to give a wider gr...
Trend 36/10 x 1/4 TCT Strip Recessor 13 x 19 x 10 x 6mm
Tooling : T.C.T.1/4in Shank. D1 = 13 mmD2 = 19 mmC1 = 10 mmC2 = 6 mm
Trend 36/19 x 1/2 TCT Strip Recessor 9.5 x 19 x 13 x 6mm
Tooling : T.C.T.1/2in Shank.D1 = 9.5 mmD2 = 19 mmC1 = 13 mmC2 = 6 mm
Trend 4/2 x 1/4 TCT Two Flute Cutter 16.0mm x 19mm
T.C.T. 1/4in Shank.C = 19 mmD = 16 mm 5/8in
Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0mm x 25mm
T.C.T. Tooling1/2in Shank.C = 25 mmD = 18 mm 45/64 in
Trend 4/5 x 1/2 TCT Two Flute Cutter 19.1mm x 25mm
T.C.T. 1/2 in Shank.C = 25 mmD = 19.1mm 3/4in